1 / 6
Hanging Kit for Seaoura SR-628 Aquarium Light — zdjęcie 1
1 / 6

Hanging Kit for Seaoura SR-628 Aquarium Light

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Bracket for hanging Seaoura sr-628 aquarium light. Uses bike shift cable.

Ocena
0 / 5
Polubienia
1
Pobrania
4
Wydruki
0
Wyświetlenia
37
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Pets
Licencja
Creative Commons — Attribution — Noncommercial

This screws into the original sliding rails. This is more secure and more adjustable that the original seaoura kit. You have the option to hang with one cable or two as seen in the pictures.

The part is designed so you can thread the cable through either direction, depending on if you want the cable head attached to the light, the barrel clamp attached to the light, or both on a single cable. The one labeled "no cutout" does not have the cutout for the power cable to pass through.

Recommended Material: PETG

Recommended Print Settings: 

  • 4 walls

  • 4 top and bottom layers

  • 50% infill

Print Orientation: Upside down

Parts needed:

  1. Standard bike shift cable. They are usually 2000mm long, but you can find longer ones if needed that are made for tandem bikes. They are 1.1mm in diameter with a 4x4mm cylindrical head.

  2. Optional - Cable Locking Barrel/Clamp(sometimes called knarp) for bicycle dropper post. Designed to fit the 5.7mm diameter or the 5mm diameter versions. You can use this to secure the other end of the cable depending on how you hang your light.

Post print prep:

You'll need to drill out the cable hole to make it larger using a 1/16" drill bit, hence the recommendation for 4 walls. 

Tagi