1 / 6
Hanging Kit for Seaoura SR-628 Aquarium Light — image 1
1 / 6

Hanging Kit for Seaoura SR-628 Aquarium Light

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Bracket for hanging Seaoura sr-628 aquarium light. Uses bike shift cable.

Rating
0 / 5
Likes
1
Downloads
5
Makes
0
Views
39
Reviews
0

Updated at source:

Model information

Category
Pets
License
Creative Commons — Attribution — Noncommercial

This screws into the original sliding rails. This is more secure and more adjustable that the original seaoura kit. You have the option to hang with one cable or two as seen in the pictures.

The part is designed so you can thread the cable through either direction, depending on if you want the cable head attached to the light, the barrel clamp attached to the light, or both on a single cable. The one labeled "no cutout" does not have the cutout for the power cable to pass through.

Recommended Material: PETG

Recommended Print Settings: 

  • 4 walls

  • 4 top and bottom layers

  • 50% infill

Print Orientation: Upside down

Parts needed:

  1. Standard bike shift cable. They are usually 2000mm long, but you can find longer ones if needed that are made for tandem bikes. They are 1.1mm in diameter with a 4x4mm cylindrical head.

  2. Optional - Cable Locking Barrel/Clamp(sometimes called knarp) for bicycle dropper post. Designed to fit the 5.7mm diameter or the 5mm diameter versions. You can use this to secure the other end of the cable depending on how you hang your light.

Post print prep:

You'll need to drill out the cable hole to make it larger using a 1/16" drill bit, hence the recommendation for 4 walls. 

Tags