Spiral Ultracube
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
--- UPDATE --- 28.12.19 --- Increased the cubes' size slightly (0.813 ---> 0.815), so that perimeters are slightly…
- Ocena
- 0 / 5
- Polubienia
- 37
- Pobrania
- 232
- Wydruki
- 1
- Wyświetlenia
- 929
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
--- UPDATE --- 28.12.19 ---
Increased the cubes' size slightly (0.813 ---> 0.815), so that perimeters are slightly intersecting. Got feedback that some of the perimeters were printing in mid air, should be fixed with new version 3.
----- Remade it by hand in 123D Design -----
New STL file is remade by me.
I guess this could be regarded as a "torture test", for stringing and bridges.
Outer perimeter of the cube is 75x75x75mm, and they shrink by a factor of 0.813 and rotated by 9° every time for 19 times total.
---- .obj and .3mf ---
Spiral fractal cube from Structure Synth. It's bit heavy on the bridging and overhang, best to have those settings dialed in. I have not, and drooping is visible, but not terrible.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.1
Infill:
solid
Category: 3D Printing