Liczymy pasujące modele…
It's the Torture Toaster! The guys at Edge of Tech challenged me to make a torture test that would be fun and interesting, and this ridiculous thing is where I ended up :) This will test your print tolerances, overhang handling, and most…
A painted Torture Toaster in 8 colours, ready to test your INDX Core ONE! 1383 changes at 0.2 layer height.
Overview A simple model for testing multi material printing with PLA, PETG and TPU (or you own selection of filaments). The assembly contains interlocking parts and tiny or zero clearance sections designed to be printed with materials…
I made this out of ABS to mimic the feel of a real Lego brick, have fun with this in any way you can :)
Just a simple remix of my first one with fewer curves and more crunchy hard edges. Otherwise identical to my first remix apart from some very minor refactoring. For more info, see PolyPearl Tower Torture Test (OpenSCAD Remix) .…
When I first downloaded the original file from Thingiverse, it contained over 50 files, with only one or two being the actual Benchy file. For your convenience, I added only the STL file, a pre-sliced GCODE file, and a photo of the product.
A painted Torture Toaster in 8 colours, ready to test your INDX Core ONE! 1383 changes at 0.2 layer height.
A satisfying print-in-place fidget working right off the print bed that you won't put down. Super fun, but small enough to put in your pocket. Originally I made not to be a torture test but after realizing how hard it is to print I made…
Makers Muse Torture Egg inspired me to do something similar. And because I make a lot of vases, I made a torture vase. This prints with a height of 120mm. If you download it, then also like it! I hope you "like" it. Category: Decor
Push your printer to the next level with the Voronoi Torture test! This all-in-one print tests cooling, print speed, extrusion, bridging, and retraction in one print. Print away! Recommended Settings: 0.1-0.2 mm layer height PLA (Or other…
If you are too bored, try torturing your 3d printer with this dreaded STL! (overhang test + stringing test)
Any number of lattices, any size, any lattice width! Go to "Open in Customizer" and make your own! Have a look at V2 (aditional options): http://www.thingiverse.com/thing:1868684 Inspired by Makers Muse YT stream…
small torture test include: precision test overhang test text test bridging test stringing test hole test remix the part in the hollow square
Designed to be printed at 0.3m layer and only takes about 11 minutes. if you scale it .6666666666 in the Z then it might work for a .2mm layer height but idk :-) . Please feel free to post results with the printer type as well as any…
This silica gel container for a filament dry box also tests tolerance, bridges, overhangs and stringing.
I designed this to test my Ender 3 printer as I was seeing some strange marks in the prints. The shape was made to print in a single line and you can use it as a visual guide to see if your print bed is level. It also proved very good at…
I designed this to test prusa and my skill of using slicer.. Can you successfully print this? Print instructions This needs no supports to print.
Do you hate your 3D printer? Do you enjoy subjecting it to overly complex jobs and watching it suffer? Then this is the print for you! This was modeled off of Angus's (Makers Muse) lattice cube and I put my own twist on it. Good luck.
Usage These are designed to be used during BDSM play to add some extra sensation and fun. There are 3 different sizes with 2 sizes of spikes. Similar to a nail bed, the more spikes there are, the less intense it is. For safety reasons,…
Christmas Tree Decorations that can double as Christmas light covers. Also a very effective torture test for your 3D printer. Holes have been included for strings to attach to your tree, and holes have been provided to fit small Christmas…
Mini torture test. This mini torture test: stringing, bridging, warping, tolerances, elephants foot, ringing and overhangs. Happy printing :)
this model is meant to test bed adhesion and overhangs.
A Christmas Tree made to test the limits of your 3D printer. Print instructions Use your best settings and then adjust accordingly to improve the overall quality of your prints.
There are a lot of test prints/models out there, but what about tests for support settings? Well..this is a test…..a torture test….for your support settings. 35 degree overnhangs. Flat overhangs. Cylinders and all. I printed this entirely…
The average FDM 3D printer has a tolerance of ±0.5% (± 0.5 mm) is yours more accurate? print and mesure this test to find out! Use a caliber (and micrometer (if you have one)) to determine the measurements! (all dimensions on 3D model are…
I made these models to help dial in circular overhangs , seams, and cooling with PETG on my bambu labs x1c.
A little 3D printed test to evaluate the quality of the printer with the features: cylinders overhangs text inclines
Bed adhesion torture test. Tests the bed adhesion in all four corners of the bed and can be scaled to fit different print beds.
I was playing around with a dodecahedron, this is what came out. Not a world class design but quite useful to test the retract and the quality of overhangs. If you like, have also a look at my other models !
Este test de voladizos se ha realizado después de mucho investigar y gracias a la experiencia aportada por @rudolf Es un test fijo a 75º. La idea de no hacer otro ángulo en este test es porque, cualquier impresora con una ventilación de…
Welcome to 3D BOATY Torture model. @Depep1 made great successor for beloved 3D Benchy. This remix is adding a little holes which test your filament retraction. Additionally filament used is trimmed to 15,5g Don't worry this model still…
I create custom additive resins as part of my job. I wanted an interesting model to use instead of the usual boring files. I removed the base and print solid. This always prints without fail. I use it for determining the correct density…
torture test and a cool thing to sit on your desk
With the surge of more advanced and affordable 3D printers, any cheap, average machine can now poop a decent 3D Benchy . That defeats the very purpose of the benchmark, and calls for a new one that can stress the printers again. Also, 3D…
Jednoduchý model pro ukázku výšky vrstvy a průměru trysky. VV = Výška vrstvy Dt = průměr trysky
want a harder challenge try this if you want a easier one try this one https://www.printables.com/model/1187149-torture-test
What is wrong with you? Why are you even here? This is the stupidest print imaginable and NOBODY SHOULD PRINT THIS EVER. It literally takes 1 year and 4 months to print and uses over 35 Kilograms of filament. REASONS TO PRINT THIS: None!…
The torture test of a different kind. Tips: Use PETG Use a litte bit of Lube on the machanism The button must be pressed firmly once, to release the spring Let it fully cool down before using Push the lever up a little to break it free…
This is mostly intended for HueForge; but if you don't have it, you can still have fun. Let's go one step at a time... If you don't have HueForge… I have added 4 STLs so you can play with this "2.5D" (or flattened) Benchy, adding color…
Makers Muse Torture Egg inspired me to do something similar. And because I make a lot of vases, I made a torture vase. This prints with a height of 120mm. If you download it, then also like it! I hope you "like" it. Category: Decor
2 pieces slide together from the hinge You can use a zip tie on the handle to slowly keep closing it It doesn't pinch the skin 15% infill 3 walls Use at your own risk, you assume all responsibility and injury
Good luck, it's not the easiest of prints. It has a very small footprint, hence a torture test. Looks cool if you succeed! (So far I'm 1 for 2) Suggest 0.2mm layer and some Nano Miner bed adhesion, no supports needed. Cheers!
A 20x20x20mm calibration cube with a couple of different tests built into it. CAD models and Engineering drawings are included for measuring or remix purposes. I was able to get + or - 0.05mm on my stock Prusa mini with Black Inland…
https://MineeForm.com/ ✅ Unlock All STL Files Immediately ✅ Make Money by Selling 3D Prints ✅ Only $10 a Month (Cancel Anytime) Category: Models
A simple torture test designed to maximise your printers capability's. Print settings 0.20mm layer hight 0-5% infill
This is a cube without an inside. It is small and when printed, it can show if you have any stringing issues.
Watch the full video here: https://youtu.be/Ph1zwEaxEB4 I thought it could be fun to take my old Tigger model and slice it for printing on the Palette+. Little did I know, the journey I was about to embark on to get this thing printed.…
Thanks for stopping by! This page has two uses: one is for you to access an equilateral triangle SVG for your TinkerCAD profile to create knurling, and the other use is for you to print a quick torture test of a cylinder with knurling…
I've been excited to test out new methods of optimizing my CoreOne now that we have new tools and configurations out to really dial the quality in. This is a model that I thought might create a number of different very fine artifacting…
I had problems with the fan shroud, so I needed a directional overhang / curling test. It will test overhang at four angles (30 to 60°) in all directions for curling issues bridging at 30, 50 and 70mm arcs at 2.5, 5 and 7.5mm radius (5,…
use solid infill and use supports recomended support material: dissolvable filament it will test perscition
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Millennium Falcon for Torture Test remixed from https://www.thingiverse.com/thing:919475 Here you go the timelapse https://youtu.be/-rTa366122Q Find your next target print nere. https://youtu.be/kc3DjEcQK34 Category: Vehicles
Prints well from 100% to 200% Scale Uncheck PrusaSlicer “Detect bridging perimeters”
A great benchmark tool once you've got a million Benchys floating around. Experiment with different settings to get a good, clean print. Polymaker has published some suggested setting changes here . The recommended settings below are…
Overview A simple model for testing multi material printing with PLA, PETG and TPU (or you own selection of filaments). The assembly contains interlocking parts and tiny or zero clearance sections designed to be printed with materials…
You love turning knobs and pushing the volume farther than everyone else? This little base lets you have fun even if you do not (yet) own a Hercules DJControl Inpulse 200. Just add a standard potentiometer, mount your knob on it, and you…
I wanted to make a model that would be small and easy to find, but also allowing me to test and fine tune my MMU, hence the multi hour benchy! I printed this in a mix of inland and hatchbox PLA, and it took me close to 17 hours to print…
Test your printer! 5 gear version will be added very soon! stay tuned and show your spinner! Category: Toy & Game Accessories
I made this out of ABS to mimic the feel of a real Lego brick, have fun with this in any way you can :)
How well can your printer deal with an overhang? This print shows you just far your printer and settings will allow you to overhang before it starts turning to spaghetti. Each arc increments by 10 degrees from 0 to 90. No printing on its…
Just a simple remix of my first one with fewer curves and more crunchy hard edges. Otherwise identical to my first remix apart from some very minor refactoring. For more info, see PolyPearl Tower Torture Test (OpenSCAD Remix) .…
This can be a very difficult torture test. It includes a number of different test in it. Start at 50% size Overhang test on the bottom. Span test across the back 60mm Cube size tolerance Multiple circles tolerance Stability printing…
When I first downloaded the original file from Thingiverse, it contained over 50 files, with only one or two being the actual Benchy file. For your convenience, I added only the STL file, a pre-sliced GCODE file, and a photo of the product.
The Porta‑Punisher: The Porta‑Punisher is a compact, functional torture test designed to reveal how well your printer handles real‑world geometry under challenging conditions. This tiny porta‑potty features overhangs, bridges, thin walls,…
Experience raw emotion captured in plastic with this haunting 3D printable figurine that brings profound artistic expression to your space. This detailed STL model showcases a contemplative figure in a meditative pose, with flowing robes…
please comment how tall your tower made it and what printer you used? >1g
It's painted in 8 colors, to test INDX. Designed to use multiple colors on almost every layer - and most layers use at least 6 colors. Some 8! Have fun.
210mm total width. Updated with more useable base legs. Pic is my best shot at it.
Just how confident are you in your printer's capabilities? Because I was pretty confident that I had fixed all of my bed adhesion issues until I tried to print this. Let's just say it didn't turn out too well... This model is functionally…
Customized version of http://www.thingiverse.com/thing:1856832 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1856832 Instructions Using the following options: dh = 0.6 dn = 2 dbl = 1 ws = 3 cs = 116…
Customized version of http://www.thingiverse.com/thing:1856832 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1856832 Instructions Using the following options: dbl = 1 ws = 2.8 cs = 186 dh = 0.5 dn = 4…
I wanted to test cooling fan performance objectively back to back, so I designed this part to help. Previously I had noticed the AIO micro 3D printer test did a good job of showing up the flaws of a lack of cooling fan, so I modelled a…
This Ikosaeder can be used as torture test. But it can also be printed as a pendent for necklaces, earrings, keychains, or bracelets. best to print with SLA, DLP or sinter printers Category: Jewelry
Christmas Tree Topper. Hard to print. Torture Test. Category: Decor
kind of two cubes intersecting a good test for stringing print with low speed, because the vibrations of the printer might cause some problems. it might help to activate minimum Layer time. Category: 3D Printing Tests
Use this model to test color changes on the Prusa MMU 2.0. While this model is only 25mm tall, it takes 500 color changes to successfully print it. If your print doesn't make it to completion you can calculate the number of color changes…
Out of boredom, I made this little test object. It will challenge your printer's bridging ability as well as its ability to print unsupported structures. It measures 40mm across. The one pictured is right off the printbed and has very…
I made this by copying and rotating toruses. I left out an axis just because :) The central pillar is hollow (and not needed) to allow a string to be poked through. You don't have to, but it might be a good idea to sink the sphere into…
This is an OpenScad design of the 'torture test' that is often shown in Maker's Muse and other video channels. To change its dimensions click on the Open In Customer button here (you need to be logged in into Thingieverse to see that…
This is a test I created to benchmark 3D printers. tests include: walls of 1, 0.8, 0.5, and 0.4 mm overhangs of 28 mm embossed text retraction Print Settings Printer Brand: LulzBot Printer: TAZ 5 Supports: No Category: 3D Printing Tests
I recently got new filament for my prusa printer and was having trouble with default profiles. XYZ cube doesn't feature any meaningful tests, and benchy is taking too long to print. I needed something simpler that would let me see if…
UPDATE - I added a second version with the hinges not going all the way through the cubes since this looks a bit nicer, it does print a bit more difficult so I would suggest first print the older version and then the updated version, the…
As of February 14, 2025, the 3DBenchy model has been released into the public domain. For more details, please visit the link below: https://www.3dbenchy.com/3dbenchy-sets-sail-into-the-public-domain/ #3DBenchy is a 3D model designed by…
Don't forget to like this model and sub my YouTube channel. Category: Sculptures
