Voroni-Ornament FDM TortureTest (hollow)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Yet another Christmas ornament... this time with a hollow voroni pattern and fully printable without any supports
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 86
- Wydruki
- 0
- Wyświetlenia
- 439
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This hollowed out variant of the voroni christmas ornament is optimized to be printed on an SLA printer. It does not require any support, the only thing you have to keep in mind is, to clean out the resin that's being trapped in the hanger during the print, otherwise it will harden during the post curing and prevent any thread from being put through the hole.
However, as I found out, this also makes for a great lattice torture test on FDM printers. It printed really well on my Bambu X1C, but I could the many retractions and z-hops being a great indicator for issues with the temperatures, stringing, warping and retractions.
(first pic shows the FDM-Print, second one the SLA-Print)
Have fun printing and merry Christmas!