RAM waterblock adapter for Corsair Dominator DDR5
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows the adapting of a Corsair dominator ram stick to a 3rd party waterblock without taking off the stock heatspreader
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 16
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is an adapter (intended to be CNCed from aluminum) which will serve as an adapter between a stick of the Corsair Dominator DDR5 titanium ram kit and a commercial waterblock (this one is sized specifially for the iceman block, but I believe most manufacturers use standard-ish spacing, your mileage may vary).
The larger holes are M3 tapped, the smaller holes are smooth (and the stock corsair cooler uses M1.6 screws, shorter ones will need to be purchased as the stock ones are far too long).