1 / 1
RAM waterblock adapter for Corsair Dominator DDR5 — image 1

RAM waterblock adapter for Corsair Dominator DDR5

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Allows the adapting of a Corsair dominator ram stick to a 3rd party waterblock without taking off the stock heatspreader

Rating
0 / 5
Likes
0
Downloads
5
Makes
0
Views
16
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial

This is an adapter (intended to be CNCed from aluminum) which will serve as an adapter between a stick of the Corsair Dominator DDR5 titanium ram kit and a commercial waterblock (this one is sized specifially for the iceman block, but I believe most manufacturers use standard-ish spacing, your mileage may vary). 

The larger holes are M3 tapped, the smaller holes are smooth (and the stock corsair cooler uses M1.6 screws, shorter ones will need to be purchased as the stock ones are far too long).