Remixed shift knob and a smaller 4wd shift modeled from the original
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my remix of the 4runner/FJCruiser shift knob by Breynolds84. I also made a smaller transfer case knob to match.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 169
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
This is my remix of the 4runner/FJCruiser shift knob by Breynolds84. I also made a smaller transfer case knob to match. Highly recommend using TPU 64D or similar for the transfer case knob. I printed it in ASA first and it came out awesome but transferred way too much noise from the transfer case. The TPU works great to kill 95% of that noise. You need to use a 30mm long coupling nut, inserted into the print at about the 299 layer. The thread is M12x1.25 for the FJ Cruiser shift handle. Also, use 55% to 60% sparse infill (gyroid). Print came out to 3.3oz with the nut inserted. TPU does not hold threads well, which is why I used a coupling nut. Both models have built in supports, so slicer supports aren't 100% needed.