Remixed shift knob and a smaller 4wd shift modeled from the original
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is my remix of the 4runner/FJCruiser shift knob by Breynolds84. I also made a smaller transfer case knob to match.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 24
- Makes
- 0
- Views
- 169
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
This is my remix of the 4runner/FJCruiser shift knob by Breynolds84. I also made a smaller transfer case knob to match. Highly recommend using TPU 64D or similar for the transfer case knob. I printed it in ASA first and it came out awesome but transferred way too much noise from the transfer case. The TPU works great to kill 95% of that noise. You need to use a 30mm long coupling nut, inserted into the print at about the 299 layer. The thread is M12x1.25 for the FJ Cruiser shift handle. Also, use 55% to 60% sparse infill (gyroid). Print came out to 3.3oz with the nut inserted. TPU does not hold threads well, which is why I used a coupling nut. Both models have built in supports, so slicer supports aren't 100% needed.