BlueSCSI Ultra Wide - ISA Style Mounting Bracket - REMIXED to fit Ultra and Ultra Wide boatds.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Added hole for USBC, added optional LED hole and moved a few things out of the way to fit the new card.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 76
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
Modified to fit the BlueSCSI Ultra and Ultra Wide boards.
Designed for FDM printing; I used PLA. After printing, remove the support material from the bracket, SD card/USB-C port openings, and optionally the LED opening.
An LED can be installed using the provided hole. The hole is intentionally undersized so you can use LEDs of different diameters. Once the support material has been removed, drill the hole to the appropriate size for the LED you choose.
Description from Nolan Gilmore, the original modeller:
This is a BlueSCSI v2 SCSI emulator mounting bracket for use with Vintage PCs. It mounts like an ISA expansion card, providing external access to the SD card slot. It will also work in PCI slots, though be mindful that PCI cards are oriented towards the other end of the bracket so you could run into conflicts with neighboring cards.
It is specifically designed for the 2023.10a version of the internal 50-pin board (at least one of the screw holes may line up on older versions of the v2, but I don't have any to verify).
M2.5x10 screws and nuts were used to attach the BlueSCSI to the bracket (though there's enough clearance that M3 could work)
If you get a warning about “floating cantilevers” or similar, ignore it. This is because of the model's built-in breakaway support. There's a 0.2mm gap between the support and the model itself.