1 / 1
Volvo 480 Sunroof Pin Replacement — zdjęcie 1

Volvo 480 Sunroof Pin Replacement

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a reversed engineered replacement part for the Volvo 480 (1986-1995) roof/sunroof mechanism.

Ocena
0 / 5
Polubienia
0
Pobrania
2
Wydruki
0
Wyświetlenia
22
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

This is a 3D-printable replacement pin for the Volvo 480 (1986-1995) sunroof mechanism. The original plastic pin can become brittle with age, making it prone to breaking or getting lost during repairs. As genuine replacement parts are becoming increasingly difficult to source, this model provides a practical alternative.

The part was recreated by measuring an original pin to achieve a close match to the factory dimensions and fit. It has been designed as a functional replacement and is intended for owners maintaining or restoring their Volvo 480.

Included files

  • STL for direct 3D printing

  • STEP file for easy editing

Recommended print settings

  • Material: PETG, ABS, or ASA

  • Layer height: 0.20 mm

  • Infill: 100%

  • Supports: Required. Underneath the holder.

Note: PLA is not recommended for long-term automotive use, especially in areas exposed to elevated temperatures.

If you find this model useful, please consider posting a make or leaving feedback. Improvements and remixes are always welcome.

Tagi