Volvo 480 Sunroof Pin Replacement
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a reversed engineered replacement part for the Volvo 480 (1986-1995) roof/sunroof mechanism.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 22
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
This is a 3D-printable replacement pin for the Volvo 480 (1986-1995) sunroof mechanism. The original plastic pin can become brittle with age, making it prone to breaking or getting lost during repairs. As genuine replacement parts are becoming increasingly difficult to source, this model provides a practical alternative.
The part was recreated by measuring an original pin to achieve a close match to the factory dimensions and fit. It has been designed as a functional replacement and is intended for owners maintaining or restoring their Volvo 480.
Included files
STL for direct 3D printing
STEP file for easy editing
Recommended print settings
Material: PETG, ABS, or ASA
Layer height: 0.20 mm
Infill: 100%
Supports: Required. Underneath the holder.
Note: PLA is not recommended for long-term automotive use, especially in areas exposed to elevated temperatures.
If you find this model useful, please consider posting a make or leaving feedback. Improvements and remixes are always welcome.