Garmin Varia Zip / cable tie holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple Zip-Tie, cable tie, holder for Garmin Varia or any simmilar bayonet style mounting device.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 59
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
Simple Garmin Varia holder for 30,08mm seat tube diameter.
I did not like how flimsy and easy to rotate the original Garmin mount was. Especially on the round seat tube it often got moved by vibrations or my (massive) thighs which caused it to no longer detect reliably or shine the light far enough - shifting the focus of the light and radar sideways into the ditch...
No additional parts required apart from the obcious, zip ties of your colorful liking.
NOTE: The cable ties are designed to go perpendicular to the seat tube to maximize clamping.
NOTE: Be sure to point the zip / cable ties to the front so the sharp edges dont cut your clothing.
NOTE: If youd like a different diameter or shape of seat tube let me know! :)
Additional parts required:
Zip ties or cable ties with max cross section of 2*6mm (size of the holes)
Instructions:
Remove the small M3 screws from the original Garmin mount to release the bayonet mounting plate
Use the same screws to attach the bayonet to your newly printed mount.
Enjoy!