Grow a Garden - Blocky Voxel Plant Set (18 Models)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
18 blocky voxel-style garden plants. Watertight, flat-bottomed, support-free. 36-125 mm.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 25
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
A blocky, voxel-styled take on the crops from Grow a Garden. 18 separate models, each one a chunky little garden piece that looks like it was cut straight out of a block world - flowers, fruit, vegetables, a mushroom, a coconut and a few stud-covered cubes to plant them next to.
Every model is a single watertight manifold, cut flat at Z=0 so it starts on a wide first layer, and shaped to print with no supports at all. Sizes run from 36 mm to 125 mm, so the whole set fits comfortably on any 180 mm bed and you can batch several per plate.
What's in the set
01 Blocky Leaf Stalk - 36 x 30 x 111 mm
02 Red Leaf Cube - 57 x 53 x 67 mm
03 Blue Fold Cube - 52 x 47 x 47 mm
04 Pixel Flower - 56 x 56 x 95 mm
05 Blocky Tomato - 65 x 60 x 80 mm
06 Honeycomb Stack - 67 x 39 x 69 mm
07 Daffodil Flower - 38 x 18 x 105 mm
08 Green Stud Cube - 63 x 63 x 60 mm
09 Yellow Stud Cube - 63 x 63 x 60 mm
10 Red Tent Fruit - 64 x 51 x 70 mm
11 Bamboo Bar - 23 x 18 x 104 mm
12 Coconut - 70 x 66 x 67 mm
13 Trap Plant Cube - 68 x 63 x 91 mm
14 Pink Crown Cube - 80 x 63 x 99 mm
15 Layered Lid Fruit - 59 x 54 x 84 mm
16 Grape Cluster - 60 x 28 x 120 mm
17 Blocky Mushroom - 70 x 58 x 108 mm
18 Curved Chili Pepper - 103 x 35 x 125 mm
Print settings
Layer height: 0.20 mm
Perimeters: 3
Infill: 15 % gyroid
Supports: none needed
Brim: only helpful on the tall slim parts (01, 07, 11, 16, 18)
Material: PLA
Nozzle: 0.4 mm
Print time: roughly 25 min to 3 h per model depending on size
The colours in the renders are just the filament each part is meant for - print them in whatever you have. Scale to 50 % for keychain-sized pieces or 150 % for shelf display. No supports, no glue, no post-processing.