Card holding tap handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tap handle I made for a friend that accepts standard sized business card for descriptions of his home-brew beer. A…
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 109
- Wydruki
- 1
- Wyświetlenia
- 822
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Tap handle I made for a friend that accepts standard sized business card for descriptions of his home-brew beer.
A 3/8"-16 nut needs to be placed in the end and the supplied spacer glued over the top to make it complete.
Uses standard 2"x3.5" business cards like Avery 5371 or similiar. https://www.amazon.com/Avery-Laser-White-Business-Cards/dp/B00005QT7U/
Print Settings
Printer Brand:
FlashForge
Printer:
FlashForge Creator Pro
Rafts:
No
Supports:
Yes
Resolution:
.2mm
Infill:
20%
Notes:
Print upsidedown with nut side facing up. You will probably need support at the very bottom for the bridge. I didn't need a raft but if you have a moving bed you might need one.
Category: Kitchen & Dining