Card holding tap handle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tap handle I made for a friend that accepts standard sized business card for descriptions of his home-brew beer. A…
- Rating
- 5 / 5
- Likes
- 29
- Downloads
- 109
- Makes
- 1
- Views
- 822
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Tap handle I made for a friend that accepts standard sized business card for descriptions of his home-brew beer.
A 3/8"-16 nut needs to be placed in the end and the supplied spacer glued over the top to make it complete.
Uses standard 2"x3.5" business cards like Avery 5371 or similiar. https://www.amazon.com/Avery-Laser-White-Business-Cards/dp/B00005QT7U/
Print Settings
Printer Brand:
FlashForge
Printer:
FlashForge Creator Pro
Rafts:
No
Supports:
Yes
Resolution:
.2mm
Infill:
20%
Notes:
Print upsidedown with nut side facing up. You will probably need support at the very bottom for the bridge. I didn't need a raft but if you have a moving bed you might need one.
Category: Kitchen & Dining