1 / 2
Cageless Planetary Gear Spinner - up to 5 gears (BETA) — zdjęcie 1
1 / 2

Cageless Planetary Gear Spinner - up to 5 gears (BETA)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

It doesn't need a cage to hold the gears in place, but how?

Ocena
0 / 5
Polubienia
1
Pobrania
1
Wydruki
0
Wyświetlenia
30
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Changelogs

22/08/2026: Beta release (just in time for the contest end)

I was inspired by a few other models, but creating a cage is too much for me. So I modeled up this cageless, easier-to-print version.

You will need a small, thin elastic band, though you could use a larger one if you wrap it multiple times.

Print Settings:

IMPORTANT: Scale to 150% or larger. The original is too small.

Print at least 2 gears, you can print up to 5. There is also an alternate version with a hole in the center, I recommend you print one of those to use as the center (sun) and one or more of the normal ones.

Layer height: 0.2 mm or less

Supports: No

Brim: If needed

Assembly:

Attach the rubber bands to the grooves in the center of the gears.

If you have 2 gears, first wrap the rubber band around one gear, then the second. The teeth shouldn't mesh yet. After that, twist the rubber band so one is upside down- the teeth are now aligned.

For multiple gears, the base sequence goes like this:

  1. Wrap band around all gears (they will self-center themselves due to the tension of the rubber band)

  2. Twist band so 1st is upside down

  3. Twist band so 3rd is upside down

  4. Twist band so 5th is upside down 

Additional Notes:

This model is still in beta, it may change over time.

If your rubber band is too thick, like mine is from folding too much, it could do this: 

If that happens, just use a thinner rubber band. 

Happy printing!

-X3

Tagi