Cageless Planetary Gear Spinner - up to 5 gears (BETA)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
It doesn't need a cage to hold the gears in place, but how?
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 1
- Makes
- 0
- Views
- 30
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Changelogs
22/08/2026: Beta release (just in time for the contest end)
I was inspired by a few other models, but creating a cage is too much for me. So I modeled up this cageless, easier-to-print version.
You will need a small, thin elastic band, though you could use a larger one if you wrap it multiple times.
Print Settings:
IMPORTANT: Scale to 150% or larger. The original is too small.
Print at least 2 gears, you can print up to 5. There is also an alternate version with a hole in the center, I recommend you print one of those to use as the center (sun) and one or more of the normal ones.
Layer height: 0.2 mm or less
Supports: No
Brim: If needed
Assembly:
Attach the rubber bands to the grooves in the center of the gears.
If you have 2 gears, first wrap the rubber band around one gear, then the second. The teeth shouldn't mesh yet. After that, twist the rubber band so one is upside down- the teeth are now aligned.
For multiple gears, the base sequence goes like this:
Wrap band around all gears (they will self-center themselves due to the tension of the rubber band)
Twist band so 1st is upside down
Twist band so 3rd is upside down
Twist band so 5th is upside down
Additional Notes:
This model is still in beta, it may change over time.
If your rubber band is too thick, like mine is from folding too much, it could do this:

If that happens, just use a thinner rubber band.
Happy printing!
-X3