MakerGear M2 V4 Fan Assembly
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
i did not design this. a friend made it for me before i learned CAD. iv asked him if i can share, he said go for it...…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 157
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
i did not design this. a friend made it for me before i learned CAD. iv asked him if i can share, he said go for it... enjoy!
almost bolt on no modification,, you may need to add some hardware of take some away,,,
works very well.
edit: i added a v2 to lower the assembly to the bed a cunt hair., un tested.
added ninjaflex filament drive,, un tested
added printable spacer in case you dont have the nylon spacer required.
UPDATE. i had problems finding a 24v bed fan locally so i whipped up a dual fan shoud for 2x12vfans wired in series,, i dont recommend using it indefinitely, but in a pinch it works
also, please take a moment to join our makergear owners club on facebook, tones of good people and info https://www.facebook.com/groups/m2owners/
Category: 3D Printing