Soda Can Lid with Rotating Cover - Keeps Wasps Out

Clips onto a standard drink can and gives it a twist-open lid, so wasps and flies cannot get in between sips.

WHAT YOU GET

• 01_Kutu_Ustu_Govde.stl -- can-top body

• 02_Doner_Kapak.stl -- rotating cover

• 03_Snap_Pim.stl -- pivot pin

• 00_Tum_Parcalar_Baski_Tablasi.stl -- all parts on one plate

KEY DIMENSIONS (mm)

• Cover outer diameter: 62

• Can rim fit: 55.4 dia

• Drinking opening: 17 x 11

• Pivot: 3.4 dia

PRINT SETTINGS

• Use a PETG you have verified as food-contact safe

• 0.16-0.20 mm layers, 3 walls

• All parts print flat with no supports

ASSEMBLY

Press the body onto the top rim of a standard drink can. Set the rotating cover on top and push the pin through the centre. Turn the cover so the opening lines up with the drinking hole to drink, and turn it back to close.

PLEASE NOTE

Food contact: only print this in a filament rated for food contact, and wash it after every use. 3D-printed surfaces trap bacteria in the layer lines, so consider a food-safe coating and replace the part regularly.

Every dimension is in millimetres. Tolerances on friction fits are 0.20-0.35 mm, which suits most FDM printers, but printers and filaments vary - print one part first and check the fit before you print a batch.

License: Creative Commons Attribution-NonCommercial-ShareAlike 4.0 (CC BY-NC-SA 4.0). Print it, remix it, share it - just credit the design and do not sell the printed parts or the files.