Heavy-Duty Picnic Tablecloth Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A wide-jaw clamp that grips the table edge hard enough to hold the tablecloth down in wind.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 13
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A wide-jaw clamp that grips a picnic table edge hard enough to keep the tablecloth down when the wind picks up.
WHAT YOU GET
• Guclu_Piknik_Ortusu_Masa_Klipsi.stl -- single-piece clamp
KEY DIMENSIONS (mm)
• Table gap: 36
• Clip width: 32
• Overall length: 82
PRINT SETTINGS
• PETG or ASA, 0.24 mm layers, 5 walls, 35% infill
• Print on the wide side face, no supports
ASSEMBLY
Lay the cloth over the table edge and push the open jaw down over both the table and the cloth. The tab at the back gives you something to pull on when you take it off.
Every dimension is in millimetres. Tolerances on friction fits are 0.20-0.35 mm, which suits most FDM printers, but printers and filaments vary - print one part first and check the fit before you print a batch.
License: Creative Commons Attribution-NonCommercial-ShareAlike 4.0 (CC BY-NC-SA 4.0). Print it, remix it, share it - just credit the design and do not sell the printed parts or the files.