Kids Ice Cream Drip Catcher with Side Handles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A tray with a handle each side that catches ice cream drips before they reach a small hand.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 12
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A shallow tray with a handle on each side that catches everything melting off an ice lolly before it reaches a small hand.
WHAT YOU GET
• Kulplu_Dondurma_Damlama_Tepsisi.stl -- single-piece tray
KEY DIMENSIONS (mm)
• Tray: 110 x 70
• Width including handles: 162
• Stick slot: 16 x 4.2
PRINT SETTINGS
• Food-contact-safe TPU or PETG recommended
• 0.20 mm layers, 3 walls, flat on the base, no supports
ASSEMBLY
Push the ice cream stick through the flexible slot in the middle. The child holds the two side handles, and the raised rim collects the drips.
PLEASE NOTE
Food contact: use a filament rated for food contact and wash after every use. Supervise young children while they use it.
Every dimension is in millimetres. Tolerances on friction fits are 0.20-0.35 mm, which suits most FDM printers, but printers and filaments vary - print one part first and check the fit before you print a batch.
License: Creative Commons Attribution-NonCommercial-ShareAlike 4.0 (CC BY-NC-SA 4.0). Print it, remix it, share it - just credit the design and do not sell the printed parts or the files.