1 / 1
Kids Ice Cream Drip Catcher with Side Handles — image 1

Kids Ice Cream Drip Catcher with Side Handles

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A tray with a handle each side that catches ice cream drips before they reach a small hand.

Rating
0 / 5
Likes
2
Downloads
0
Makes
0
Views
12
Reviews
0

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution — Noncommercial — Share Alike

A shallow tray with a handle on each side that catches everything melting off an ice lolly before it reaches a small hand.

WHAT YOU GET

• Kulplu_Dondurma_Damlama_Tepsisi.stl -- single-piece tray

KEY DIMENSIONS (mm)

• Tray: 110 x 70

• Width including handles: 162

• Stick slot: 16 x 4.2

PRINT SETTINGS

• Food-contact-safe TPU or PETG recommended

• 0.20 mm layers, 3 walls, flat on the base, no supports

ASSEMBLY

Push the ice cream stick through the flexible slot in the middle. The child holds the two side handles, and the raised rim collects the drips.

PLEASE NOTE

Food contact: use a filament rated for food contact and wash after every use. Supervise young children while they use it.

Every dimension is in millimetres. Tolerances on friction fits are 0.20-0.35 mm, which suits most FDM printers, but printers and filaments vary - print one part first and check the fit before you print a batch.

License: Creative Commons Attribution-NonCommercial-ShareAlike 4.0 (CC BY-NC-SA 4.0). Print it, remix it, share it - just credit the design and do not sell the printed parts or the files.

Tags