Flip-Flop Carry Clip - Locks a Pair Together
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clips both flip-flops together by their straps and locks, so a wet pair hangs off your bag.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 11
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Summer
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Clips both flip-flops together by their straps and locks shut, so a wet pair hangs off your bag instead of going loose in it.
WHAT YOU GET
• 01_Terlik_Tasima_Govdesi.stl -- carrier body
• 02_Cift_Snap_Kilit.stl -- twin-pin snap lock
• 00_Tum_Parcalar_Baski_Tablasi.stl -- both parts on one plate
KEY DIMENSIONS (mm)
• Body: 115 x 55
• Sandal strap slot: 16
• Hand opening: 70 x 21
PRINT SETTINGS
• PETG, 0.20 mm layers, 4 walls
• Print the lock piece with the pins facing up
ASSEMBLY
Feed the straps of both flip-flops into the open slots underneath. Press the two pins of the lock bar into the holes in the body to close the slots.
Every dimension is in millimetres. Tolerances on friction fits are 0.20-0.35 mm, which suits most FDM printers, but printers and filaments vary - print one part first and check the fit before you print a batch.
License: Creative Commons Attribution-NonCommercial-ShareAlike 4.0 (CC BY-NC-SA 4.0). Print it, remix it, share it - just credit the design and do not sell the printed parts or the files.