Flip-Flop Carry Clip - Locks a Pair Together
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Clips both flip-flops together by their straps and locks, so a wet pair hangs off your bag.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 0
- Makes
- 0
- Views
- 12
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Summer
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Clips both flip-flops together by their straps and locks shut, so a wet pair hangs off your bag instead of going loose in it.
WHAT YOU GET
• 01_Terlik_Tasima_Govdesi.stl -- carrier body
• 02_Cift_Snap_Kilit.stl -- twin-pin snap lock
• 00_Tum_Parcalar_Baski_Tablasi.stl -- both parts on one plate
KEY DIMENSIONS (mm)
• Body: 115 x 55
• Sandal strap slot: 16
• Hand opening: 70 x 21
PRINT SETTINGS
• PETG, 0.20 mm layers, 4 walls
• Print the lock piece with the pins facing up
ASSEMBLY
Feed the straps of both flip-flops into the open slots underneath. Press the two pins of the lock bar into the holes in the body to close the slots.
Every dimension is in millimetres. Tolerances on friction fits are 0.20-0.35 mm, which suits most FDM printers, but printers and filaments vary - print one part first and check the fit before you print a batch.
License: Creative Commons Attribution-NonCommercial-ShareAlike 4.0 (CC BY-NC-SA 4.0). Print it, remix it, share it - just credit the design and do not sell the printed parts or the files.