1 / 1
Ant-Proof Water Moat Feet for Pet Bowls — zdjęcie 1

Ant-Proof Water Moat Feet for Pet Bowls

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Four little water moats for the feet of a pet bowl. Ants cannot cross, so the food stays theirs.

Ocena
0 / 5
Polubienia
2
Pobrania
1
Wydruki
0
Wyświetlenia
24
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Pets
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Four little water moats that sit under the feet of a pet bowl. Ants cannot cross the water, so the food stays theirs.

WHAT YOU GET

• Karinca_Hendegi_56mm_4_Adet.stl -- 56 mm moat, 4 up

• Karinca_Hendegi_70mm_4_Adet.stl -- 70 mm moat, 4 up

• 00_Tum_Parcalar_Baski_Tablasi.stl -- everything on one plate

KEY DIMENSIONS (mm)

• Outer diameters: 56 / 70

• Moat depth: 9

• Centre island height: 16

PRINT SETTINGS

• PETG recommended, 0.20 mm layers, 4 walls, 20% infill

• Print 4 of one size; use 5 bottom layers so the moat holds water

ASSEMBLY

Stand each foot of the pet bowl on a centre island and fill the surrounding ring with water. The bowl foot must not touch the water. Refresh the water regularly.

PLEASE NOTE

Test with an empty bowl first. A raised bowl is easier to tip over, and standing water needs changing to avoid becoming a mosquito breeding site.

Every dimension is in millimetres. Tolerances on friction fits are 0.20-0.35 mm, which suits most FDM printers, but printers and filaments vary - print one part first and check the fit before you print a batch.

License: Creative Commons Attribution-NonCommercial-ShareAlike 4.0 (CC BY-NC-SA 4.0). Print it, remix it, share it - just credit the design and do not sell the printed parts or the files.

Tagi