Ant-Proof Water Moat Feet for Pet Bowls
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Four little water moats for the feet of a pet bowl. Ants cannot cross, so the food stays theirs.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 1
- Makes
- 0
- Views
- 23
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Four little water moats that sit under the feet of a pet bowl. Ants cannot cross the water, so the food stays theirs.
WHAT YOU GET
• Karinca_Hendegi_56mm_4_Adet.stl -- 56 mm moat, 4 up
• Karinca_Hendegi_70mm_4_Adet.stl -- 70 mm moat, 4 up
• 00_Tum_Parcalar_Baski_Tablasi.stl -- everything on one plate
KEY DIMENSIONS (mm)
• Outer diameters: 56 / 70
• Moat depth: 9
• Centre island height: 16
PRINT SETTINGS
• PETG recommended, 0.20 mm layers, 4 walls, 20% infill
• Print 4 of one size; use 5 bottom layers so the moat holds water
ASSEMBLY
Stand each foot of the pet bowl on a centre island and fill the surrounding ring with water. The bowl foot must not touch the water. Refresh the water regularly.
PLEASE NOTE
Test with an empty bowl first. A raised bowl is easier to tip over, and standing water needs changing to avoid becoming a mosquito breeding site.
Every dimension is in millimetres. Tolerances on friction fits are 0.20-0.35 mm, which suits most FDM printers, but printers and filaments vary - print one part first and check the fit before you print a batch.
License: Creative Commons Attribution-NonCommercial-ShareAlike 4.0 (CC BY-NC-SA 4.0). Print it, remix it, share it - just credit the design and do not sell the printed parts or the files.