Counting matching models…
ok guys I'll try to make this as simple as possible. the case i used was the axigear 16x13x6 from amazon(i chose this for it's mostly flat design). d-ring tie down anchors, and askuko 56 inch shoulder strap(other straps would not fit the…
Update ---> alternative slim versions with smaller outer diameter --------------------------------------------------------------------- Auto Feeding Inline Clip (3x Short Darts) Optimized dart storage diameter and barrel diameter to…
I have already broken two of the adapters, and the high price of the Medela breast feeding set makes buying a new one very unattractive. Especially since it will break again quickly. Stop capitalism, repair it yourself! I printed it with…
Designed in thinker cad For my aquarium so I could feed my fish(guppies) and the food don't scatter everywhere. printed in a Ender 3 V2 Neo on PLA 0.14mm layer height on a 0.4mm nozzle No supports needed print at 100% for a 6 cm hole on…
Sturdy stand for pet bowls that raises the dish and provides a more comfortable feeding height for cats or small dogs. The table improves comfort while eating and prevents the bowl from sliding around. ✨ Features: Fits round bowls (e.g.,…
Water via PEG Feeding bottle spacer using Giving Set Backpack method. Bottle:- Nutricia Flocare Container 1 Litre. Nutricia Flocare Container 1000ml 1L With Cap 10 each Sterile Empty Latex Free I found this bottle to be loose compared to…
This is a replacement part for the Ardo breastfeeding supplementer. On ours, the screw-cap broke quite quickly (thin plastic), thus I've designed a replacement part to print and made it much more sturdy (also to overcome layer adhesion…
Cable Feeding Cap for Conduit This small plastic cap helps guide electrical cables smoothly through flexible conduits and tight bends without snagging. The tapered nose reduces friction, while the internal gripping feature holds the cable…
A feeding port for polycarbonate lids. Just drill a 2" hole into the front middle of your lid and pop the feeding port in. For the feeding port rim I'd recommend printing with 4 walls, but for the plug I would use 2 walls and a lot of…
A rather flat food dish for dog or cat food. I've created this for our dog, she's very sensitive to noise and dislikes common food bowls since they produce some rattling noise on hard surfaces. These dishes are soft (TPU90A), easy to…
PEG Feeding Grip Key. MND can cause a loss of grip. This is an aid. Video on YouTube
General A compact pet feeding tracker designed to prevent accidental double feeding. (Unfortunately for many pets ;-) ) Simply rotate the dial to show the last feeding time, making it easy for everyone in the household to see when the pet…
Remix of great motor cover - i made it thinner and without a cable compartment.
I created this Feeding Tube Holder Clip for an IV pole from the awesome original CPAP Bracket file. Two sizes are provided to fit the top and 2nd IV pole sections of approximately 15.8mm and 18.7mm diameter tubes on a Pitch-It Sr. IV…
Keep your aquarium surface organized! These custom floating rings create "clear zones" on the water surface, preventing floating plants from covering the entire tank. Perfect for maintaining open areas for light penetration and easy…
dispenses little feeding/ water cups for your reptiles. slot for command strip on back
This simple dam prevent floating aquatic plant from blocking the feeding hole in the lid. It attaches to the glass using usual 4mm airline clips
its a feeder for guinea pig. you can use it as a tray to grow grass for the guinea pig. it is 20x10x2 CM
Important! This is a remix version of Perfect Fit Bambu Lab/Bambulab AMS Feeder Button Cover Protector for the new revision of AMS feeding funnel . There are several reports that such AMS units arrived to users from 08.2023 . Please check…
This slider helps my family keeping track at which time our pet was the last fed to avoid over feeding this manipulation master. This can however be used in a lot more ways like keeping track of player scores in a board game, as a simple…
This fish looks like the fish in the board game “Feeding Time!” by HABA and might be used as an replacement Part. Schould be scaled down from 4 mm to 3.5 mm in the z-dimension for netter resemblance. Dieser Fisch sieht aus wie die Fische…
Fresh water without insect escape. Cut “U” Shape (9x10mm) on sales box, insert dish and add water. The holes at the bottom are very small (2x1mm), so there is no risk of insects escaping (except for the smallest sizes). Print settings:…
ok guys I'll try to make this as simple as possible. the case i used was the axigear 16x13x6 from amazon(i chose this for it's mostly flat design). d-ring tie down anchors, and askuko 56 inch shoulder strap(other straps would not fit the…
Maybe this is good for only this specific scenario but I share nonetheless. Included .blend file in case someone wanna edit it. What it does: show the place of the bowls, so gf wont put under your feet and you wont step into cat food…
This Aquatic Feeding Den aims to allow slender bottom-feeding fish, such as Kuhli or Neon Loaches, during feeding time or to give them a place to hide without being disturbed by larger aquatic species. This Den also will allow any small…
This feeding bowl is designed to be an interactive feeding experience for your reptiles. The overhang serves to allows insects to "hide" then re-appear, ready for your gecko to eat! The overhang is designed with a dual-purpose, and the…
Mount made for a Wireless Sonar sensor which can be attached to a RC fish feeding ship. Made for easier and more succesful feeding while fishing. Update: Added 2 new versions of the main part Heat insert (M3) version to avoid using M3…
My son uses gravity feed bags and tubes that twist-lock together but are very difficult to get back apart. I created this tool that slips over the connectors to give you better grip. Print two and connect them with a piece of string with…
Diese kleine Schaufel wurde speziell dafür entworfen, um das Vogelhaus mit Vogelfutter zu befüllen. Die Schaufel kann natürlich auch für jeden anderen Zweck benutzt werden ;-) Gedruckt mit PLA ohne besondere Einstellungen. ……………….. This…
There was a feeding hatch already on thingiverse but my printer is not accurate enough to print the screws thread, so I bougth a kit of M3 nylon screw & nuts and designed it base on those screws. Be aware that you can't use metal in an…
https://buymeacoffee.com/stealthyscw Kangaroo OMNI Enteral Feeding Pump RTL badge holder Utilizes the pole clamp threaded knob and 3M VHB double side tape to mount Printed in PETG-CF .2 layer height
THIS IS MOSTLY COMPLETE BUT I AM STILL REFINING IT. If you find something is amiss with it then please let me know. All edits will be noted at the bottom of this description. I remade the entire design to fit some US products I was able…
Small insert for board game “Wingspan”. Box for feeding tokens and cover is scoring card with tasks for each round of the game. Also suitable for 1st (Europe) and 2nd (Oceania) game expansions. Malé vylepšení pro deskovku “Na křídlech”.…
This is basically just a sign to let us know if one of us already fed our guinea pig. He likes to trick us by squeaking like he hasn't been fed yet when the other one of us is not around. I put some magnets on the back so it can adhere to…
Filament guide for the MK4 frame, designed for side feeding. Includes a forgetful feature for inserting filament when already loaded. NOTE: Separate 3mf & STLs for left and right sides are provided; use the correct one. The forgetful…
This is a simple floating ring for feeding your fish. It's great to keep the floating plants from blocking the light and food.
Der innovative Aquarium Futterring mit magnetischer Halterung ist die ideale Lösung, um Futter gezielt und sauber im Aquarium zu platzieren. Mit seiner praktischen Konstruktion bleibt das Fischfutter im Ring, bis es von den Bewohnern…
What this project accomplishes Easy/Fast filament loading/unloading from a single position above your printer. The least amount of hardware needed. The least amount of filament needed. (about 130g per box) The least amount of holes being…
Intro: With this mod you can feed filament over the top of the Prusa XL original enclosure without the need of drilling holes to the metal sheet. You have to drill the top acrylic plate which is replacable…
A simple reminder of when the Dog was fed last, really helpful in a busy home, and one less thing to remember. These files are in 3D Manufacturing format. When imported into Prusa slicer, select “YES” for: "This file contains several…
Are you in search of an advanced project, with large printed parts, gears and electronics? So, why not print your own pet/cat feeding device? I created detailed instructions on how to print and build the shown device - just leave you the…
Prusa XL top filament feeder
Recommend drilling the smallest diameter with a Ø2mm drill. This may work for other filament sensors, this is however untested. For reference it is a M6x1 thread, 4.6mm long.
This small dish measures about 1 inch wide and 1/2 inch deep, making it ideal for a meal for the smallest of your terrarium pets. The idea came from a friend who asked for this solution for feeding geckos. I included a convenient keyhole…
Vogel Futter Stelle für Straßen Schild Stangen Diese Futterstelle ist für die Montage an Stangen / Staßenschild Stangen geeignet. Es können einfache Vogelknödel halter oder auch Lockeres Futter eingefüllt werden. 4 Schrauben und 4 Muttern…
This small spoon is designed for dispensing powdered fish food. Its compact size ensures precise and easy portioning, making feeding your fish a breeze. The "ergonomic" handle provides a comfortable grip, allowing for effortless scooping…
I use a feeding tube and the Enfit connector gets stuck very often. Even my husband can not always get it to seperate. This causes stress and is a hassle. Even when the Enfit connector isn't very tight or stuck it causes stress on my…
This 3D-printed fish feeding ring is designed to keep fish food contained in one area, preventing it from dispersing throughout the aquarium. The ring floats on the water's surface and ensures that food remains easily accessible to the…
Wanted to add a slow-feeding pre-breaker to my Eureka Mignon Facile (primarily so I could more easily use their Filtro Pro burr for espresso) so I built these holders to mount a handgrinder to the top. All have a lip on them to accomodate…
This is a remix from the original Prusa design. I've extended the rear of the buffer assembly tube holder that leads to the MMU2 unit. The fit was extremely tight before and my fingers did not easily fit into the tiny gap to feed the…
I like to print directly "out of the box". :-) So just in order to support the feeding process and to minimize the stess force during the print process, I created this simple gadget which fits to the intended filament-holder place. I used…
Update ---> alternative slim versions with smaller outer diameter --------------------------------------------------------------------- Auto Feeding Inline Clip (3x Short Darts) Optimized dart storage diameter and barrel diameter to…
Aquarium feeding ring. A suction cup is required for operation. It works perfectly when we have a filter equipped with a skimmer. Diameter 80 mm.
As I don't feed my pet reptiles daily, i designed a tracker to remember when I fed them the last time. It is a simple print made of two parts. The tracker is available in german ("_ger") and in english ("_en"). A color swap at 3mm height…
Full reduced friction feeding system For extruder number one on the Prusa XL from the left side mounted spool holder using an additional filament guide mounted using the same method as the OEM filament guides. The natural spring tension…
UPDATE 2025-April-26: Improved Version 2 available After pelletizing a significant amount of filament, I identified several opportunities for improvement. As a result, I’ve created Version 2 of the pelletizer remix. First of all, thank…
A triangulating Spool holder that feeds from the top and utilizes the factory M3 mounting holes in the top frame. It acts as a cross brace and prevents the top aluminum profiles from twisting. !!!!! The current revision has no mounting…
three sizes of ant feeding dishes :3 useful for not getting outworld dirty print at 0.12 layer height or lower to prevent nasty gunk from getting into all the layer lines
This model is compatible with the lego system.
Suitable for bowl with flat bottoms. Model is for bowl with internal diameter of about 145 mm but you can scale it to fit your needs!
This was a quick design that allows you to utilise magnetic pogo connectors on a flexure to connect and disconnect a modified pump charger by just picking up the feeding stand - this is helpful for those who would like to feed at night…
I designed this bowl from the topography of Mt Fuji. The intent is to allow our ornate box turtle (or other small creatures) to climb up to the feeding bowl, yet to also keep the food (i.e. worms) inside.
Keep track of whether you have fed your little creatures buy rotating the wheel to match the current day and using the sliders to indicate whether they have been fed yet or not. Included in the model files is a Blank Top .stl that you are…
Dart Zone Max Solo Auto Feeding Inline Clip Inline clip for 3x short darts for the Dart Zone Max Solo. Flicking the blaster before shooting is NOT necessary because I kept the inner diameter of the dart storage area very tight and…
More flexibility for setup if you use the great lee inline bullet feed die in a single tube mode.
This holder is designed to keep a Flocare Infinity feeding pump and a 500 ml container securely in place—whether you’re on the go or setting up for night feedings. Its compact form allows it to fit inside a small children’s backpack, so…
Feeding bottle holder for my kid's bed. Holds most feeding bottles or 0.7l water. It was designed to look nice and strong enough so he wouldn't break it (as in my first four iterations). Survived 3 years, and in the meantime, I also made…
Description The smart feeding enclosure for cats ensures that each of our cats has safe and exclusive access to their own food. This is especially useful in households with multiple cats, where some may have health or behavioral issues…
HAS THE CAT BEEN FED? SIGN We have a very greedy cat who likes to pretend to other family members that he hasn't been fed. So when I feed him twice a day, I use this sign to let others know he has been fed and is just being greedy.…
This is a modified version of the Spacer C from the Self Feeding Open Source Filament Pelletizer by Teaching Tech, at https://www.printables.com/model/672486-self-feeding-open-source-filament-pelletizer I blew up my pelletizer attempting…
That's my 9-year-old daughter's brilliant idea of how she could help strays! We would like to inform you that this is not a ready-made project but an idea that we cannot implement and we will need your help to make it real. Each stray…
This Dog Feeding Reminder lights up on a daily schedule that you set in the Arduino code. Use it to alert you and other family members when it's time to feed your dog , then press the Button to turn off the alert. Everybody in the family…
Hanging food bowl that can be suspended with a cord. No supports, no glue, no screws, no additional parts. Click the arms into the bowl and join them together with the knob. Happy printing! PS: Like to see your makes with your pets
I was looking for quite some time to find a solution of an inexpensive good quality dry box fitting my filament spools and offering smooth rotation and easy replacement of spools. Long story short I ended up remixing a few designs. Now, I…
Francis designed this for his mom. Feedback from nurses and other caregivers invited.
Having just bought a Bambu A1 and not wanting to spend hundreds of dollars on an AMS or MMS, I designed a low cost solution. It allows you to keep 4 reels of filament mounted on a reel caddy and, by simply unloading one color/filament and…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and please check out my other models for something else you might like! ********* I'm just getting into the fish keeping with a…
It's a fish portal that you can use to see or feed your fish through if you have floating plants like duckweed.
feeding flap for Fluval siena 330 fish tank. No special mount needed. For assembly, use superglue
https://MineeForm.com/ ✅ Unlock All STL Files Immediately ✅ Make Money by Selling 3D Prints ✅ Only $10 a Month (Cancel Anytime) Category: Models
https://MineeForm.com/ ✅ Unlock All STL Files Immediately ✅ Make Money by Selling 3D Prints ✅ Only $10 a Month (Cancel Anytime) Category: Models
The Shrimp Frisvee Auto Feeding Holder is used to prevent moisture and salt buildup on the automatic shrimp feeders and can be secured to the shrimp tanks with zipties. Developed by the Aquatic Germplasm and Genetic Resources Center…
I made these keys so you can so you can manually open the valve in the feeding set/bag for a Kangaroo Joey and Omni enteral feeding pump. Mine were printed out of ABS+ but any filament should work. I used the califlower test print to…
For printing TPU I used this Top Spool Holder https://www.printables.com/model/1160668-alternative-spool-holder-prusa-core-one but the TPU is not good inserted into the Nextruder. For this I develop this pulley. Needed parts: 1x Print…
Description This floating ring helps you manage floating plants and feeding in your aquarium. You can use it in two ways: Plant separator : Place floating plants inside or outside the ring to stop them from spreading across the whole…
A sliding indicator sign that reveals either “Fed” or “Not Fed” to show whether the dog has been fed clearly. The user slides a cover to display the current feeding status. Print using .15mm layer height to prevent issues with text being…
These parts can be used to repair a 6-port hummingbird feeder. The opening for the feeder's glass tube is ~3.1 in (79 mm) diameter; the nectar tray upon which the top sits is ~5 ¾ in (147 mm) diameter. The original plastic parts weaken…
These parts can be used to repair a 4-port hummingbird feeder. This opening for the feeder's glass tube is ~3 in (76 mm) diameter; ; the nectar tray upon which the top sits is ~5.6 in (142 mm) diameter. The original plastic parts weaken…
i have made a fish feeding ring for fish aquarium. Print it with 2 side walls, 2 bottom walls and 3 upper walls, while keeping infill to 5%
Design Compatibility & Printing Instructions This design is suitable for aquariums with a minimum depth of 185 mm and can accommodate up to 295 mm in length. The height is adjustable to fit your specific tank dimensions. It is compatible…
Design Name: PatiPati Feeding Bowl Model Type: Dual food & water bowl with cat figure and paw print details Recommended Material: PLA / PETG 📐 Approximate Dimensions: Width: 140 mm Depth: 90 mm Height: 65 mm Bowl Diameter: 2x ~70 mm…
