Self feeding open source filament pelletizer - 8 mm Router Bit
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Converts waste filament into small segments for recycling. Only requires a power drill to operate.
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 127
- Makes
- 0
- Views
- 968
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
Pelletizer based on TeachingTechs design (https://www.printables.com/de/model/672486-self-feeding-open-source-filament-pelletizer) for router bits with 8 mm shafts and corresponding bearings (8x19x6 mm). The original BOM stays the same, except for:
- 19 mm router bit (e.g. https://www.amazon.de/dp/B0BS3ZVZMR?ref=ppx_yo2ov_dt_b_product_details&th=1 (the one with 20 mm cutting length))
- 2 x bearing 8x19x6 (came included with the router bits)
I also changed most of the files to include fillets and chamfers where appropriate and used the PET collection adapter (https://www.printables.com/de/model/680727-self-feeding-open-source-filament-pelletizer-remix) instead of the original one.
Printed in PET with 0.2 mm Strength setting (6 wall loops and 25 % infill).