Self feeding open source filament pelletizer - 8 mm Router Bit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Converts waste filament into small segments for recycling. Only requires a power drill to operate.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 127
- Wydruki
- 0
- Wyświetlenia
- 968
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
Pelletizer based on TeachingTechs design (https://www.printables.com/de/model/672486-self-feeding-open-source-filament-pelletizer) for router bits with 8 mm shafts and corresponding bearings (8x19x6 mm). The original BOM stays the same, except for:
- 19 mm router bit (e.g. https://www.amazon.de/dp/B0BS3ZVZMR?ref=ppx_yo2ov_dt_b_product_details&th=1 (the one with 20 mm cutting length))
- 2 x bearing 8x19x6 (came included with the router bits)
I also changed most of the files to include fillets and chamfers where appropriate and used the PET collection adapter (https://www.printables.com/de/model/680727-self-feeding-open-source-filament-pelletizer-remix) instead of the original one.
Printed in PET with 0.2 mm Strength setting (6 wall loops and 25 % infill).