Hanging Chicken feeding trough
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple chicken feeder using a HT 110mm tube (HT DN110 Abwasserrohr). I used some hot glue to attach the tube to the…
- Rating
- 5 / 5
- Likes
- 53
- Downloads
- 131
- Makes
- 0
- Views
- 1,865
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
A simple chicken feeder using a HT 110mm tube (HT DN110 Abwasserrohr).
I used some hot glue to attach the tube to the trough. Using two strings around the tube I hanged it to the ceiling of the chicken coop.
I printed this design with 35% infill.
Update: My chickens eat like pigs, therefore a lot is spread around the trough now, therefore I designed an extension for the existing V1 trough and uploaded a V2 design, which comes automatically with higher outer walls. Let's test! :-)
The extension fits quite well to the v1 and glue isn't necessary.
UPDATE 01.08.2020: I added a HT umbrella, for those who like to leave it in the rain, you can print either 4 times HT_umbrella with 8* HT_umbrella_dowel or if your printer is big enough: HT_umbrella_whole.
Category: 3D Printing