Counting matching models…
Ein Gitter, das in die Muffe eines DN110-HT-Rohres passt. Das Außenmaß der Einsteckseite ist 110mm, was dem Normdurchmesser eines DN110 HT-Rohres entspricht. Früher wurde dieses Rohr mit DN100 bezeichnet.
Muffenstopfen DN110 nach Norm Zur Abdeckung von Rohren
I needed a valve that would let me connect my dust extraction system to the table saw and jointer. This valve connects to DN 110 drainage pipes commonly found in Europe. There's a rich ecosystem of ball valves on Printables. While this…
Purpose: This clamp fits on a DN110 pipe (110 mm outer diameter) and has eight M4 threads to mount things on (4 threads x 2 rows, spaced 40 mm apart). I've designed it to hang an IKEA Skadis pegboard on a pipe in my cellar to put all…
Can be used to connect a D100 hose to a DN110 system. You should use an original gasket of the KG pipes. Groove is provided accordingly.
Overview / Features This project features two high-quality 3D-printable adapters designed to connect an IBC tank/container with a standard S165x7 coarse thread (DN150) directly to standard household waste pipes ( DN110 or DN75 ). It is a…
This is a parametric pipe plug designed for sewer / drainage pipes with rubber seals (HT / KG systems). The model is generated using OpenSCAD and supports pipe sizes from DN32 to DN110 . For convenience, I have also included pre-generated…
I used the “ Magnetic Dust Collection Connectors ” from Robert Bieber and added the male part for a DN110 connection. For assembly information visit the original part and read the description.
Adapter for a 100mm hose to a DN110 pipe. Comes with and without threads. The DN110-facing side measures 109.6mm in diameter. The hose-facing side starts at 98mm and ends at 100mm.
Can be used to connect a blast gate to a DN110 system. You should use an original gasket of the KG pipes. Groove is provided accordingly. The remaining parts still need to be downloaded from the creator here . You need a 8xM6 screws and…
Can be used to connect a D100 hose to a DN110 system.
This is a two part cover for a DN110/DN100 ventilation-pipe. It is a very loose fit to accomodate for some soft sealing tape. You can fit a piece of fine insectscreen between the inner and the outer partr to prevent bugs from getting in…
Ich habe eine Dunstabzugshaube, welche vom Küchenbauer nicht an die vorhandene Dachentlüftung angeschlossen wurde. Ich wollte es umbauen und habe dafür eine Muffe von 150mm auf DN110 benötigt.
Ceiling mount for DN110 pipes. Useful for building a dust extraction system. One side of the fixture prints in place. The other side requires a single M3x20 hex socket screw. This print requires minimal supports, best take a look at the…
Die Hülse hat einen Außendurchmesser von 110mm, mit einem etwa 2mm starkem Kragen der einen Außendurchmesser von 120mm hat. Länge der Hülse sind 45mm
Simple battery tube housing for Shimano BT-DN110 Di2 Battery. Used this with a bottle cage pump mounting. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2mm Infill: 20% Notes: 20% infill, 4…
Die Hülse hat einen Außendurchmesser von 110mm, mit einem etwa 2mm starkem Kragen der einen Außendurchmesser von 120mm hat. Länge der Hülse sind 45mm
Protects insulated piping from rubbing and damaging its insulation when exiting a PVC conduit. Made for 80mm outside diameter. Has a notch that holds the piece on top of a standard DN110 european PVC conduit (KG- or HT-Rohr). Needs…
The adapter is printed with PETG and do not need supports. To assemble the adapter, use 2 cylinder screws M5x25 and 2 hexagon nuts M5.
Fan duct to connect 120mm fan to DN110 pipe. Outer diameter of cilinder is 103mm to fit into 110mm pipe. Use few turns of tape for tight fit.
