1 / 5
Ventilation cover/grill DN110/DN100
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A covergrill for a DN100/DN110 size ventilation
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 74
- Makes
- 0
- Views
- 486
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a two part cover for a DN110/DN100 ventilation-pipe. It is a very loose fit to accomodate for some soft sealing tape.
You can fit a piece of fine insectscreen between the inner and the outer partr to prevent bugs from getting in the house.
Prints without support. Snap in fit. You can, but don't need to screw the inner part down to the wall with 4 pcs 4mm countersunk screws.
OpenSCAD enclosed as usual for easy adaption.
Enjoy!
Cheers
Armin