Parametric Pipe Plug for Sewer Pipes (DN32, DN40, DN50, DN75, DN90, DN110)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Parametric pipe plug for sewer pipes with rubber seals. Supports DN32–DN110, includes pre-generated STL files for DN32,
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 156
- Makes
- 0
- Views
- 391
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
This is a parametric pipe plug designed for sewer / drainage pipes with rubber seals (HT / KG systems).
The model is generated using OpenSCAD and supports pipe sizes from DN32 to DN110.
For convenience, I have also included pre-generated STL files for DN32, DN40, and DN50.
Features
Designed to fit pipes with rubber gaskets
Stop flange prevents the plug from being pushed in too far
Chamfered lead-in for easier insertion into the seal
Hollow interior to save material and reduce print time
Adjustable tolerance and wall thickness
Fully parametric – easily generate other DN sizes
Included Files
OpenSCAD source file (DN32–DN110)
STL files:
DN32
DN40
DN50
Recommended Print Settings
Material: PLA / PETG (PETG recommended for better durability)
Layer height: 0.2 mm
Infill: 20–30%
Perimeters: 3
No supports needed
Print orientation: flange on the build plate
Notes
This plug is intended for temporary or protective use, not for pressurized systems.
If you need a different DN size, simply change the parameter in OpenSCAD and export a new STL.