Parametric Pipe Plug for Sewer Pipes (DN32, DN40, DN50, DN75, DN90, DN110)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parametric pipe plug for sewer pipes with rubber seals. Supports DN32–DN110, includes pre-generated STL files for DN32,
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 156
- Wydruki
- 0
- Wyświetlenia
- 391
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a parametric pipe plug designed for sewer / drainage pipes with rubber seals (HT / KG systems).
The model is generated using OpenSCAD and supports pipe sizes from DN32 to DN110.
For convenience, I have also included pre-generated STL files for DN32, DN40, and DN50.
Features
Designed to fit pipes with rubber gaskets
Stop flange prevents the plug from being pushed in too far
Chamfered lead-in for easier insertion into the seal
Hollow interior to save material and reduce print time
Adjustable tolerance and wall thickness
Fully parametric – easily generate other DN sizes
Included Files
OpenSCAD source file (DN32–DN110)
STL files:
DN32
DN40
DN50
Recommended Print Settings
Material: PLA / PETG (PETG recommended for better durability)
Layer height: 0.2 mm
Infill: 20–30%
Perimeters: 3
No supports needed
Print orientation: flange on the build plate
Notes
This plug is intended for temporary or protective use, not for pressurized systems.
If you need a different DN size, simply change the parameter in OpenSCAD and export a new STL.