Hanging Chicken feeding trough
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple chicken feeder using a HT 110mm tube (HT DN110 Abwasserrohr). I used some hot glue to attach the tube to the…
- Ocena
- 5 / 5
- Polubienia
- 53
- Pobrania
- 131
- Wydruki
- 0
- Wyświetlenia
- 1865
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
A simple chicken feeder using a HT 110mm tube (HT DN110 Abwasserrohr).
I used some hot glue to attach the tube to the trough. Using two strings around the tube I hanged it to the ceiling of the chicken coop.
I printed this design with 35% infill.
Update: My chickens eat like pigs, therefore a lot is spread around the trough now, therefore I designed an extension for the existing V1 trough and uploaded a V2 design, which comes automatically with higher outer walls. Let's test! :-)
The extension fits quite well to the v1 and glue isn't necessary.
UPDATE 01.08.2020: I added a HT umbrella, for those who like to leave it in the rain, you can print either 4 times HT_umbrella with 8* HT_umbrella_dowel or if your printer is big enough: HT_umbrella_whole.
Category: 3D Printing