One-Handed Playing Card Holder - 4 Rows
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 180 mm stand with four angled channels that holds a full hand of cards upright for you.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 34
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A 180 mm stand with four angled channels that holds a full hand of cards upright, for anyone who cannot fan cards comfortably in one hand.
WHAT YOU GET
• Tek_Elle_4_Sirali_Oyun_Kagidi_Tutucu.stl -- single-piece holder
KEY DIMENSIONS (mm)
• Length: 180
• Card rows: 4
• Channel: 2.2 x 42
• Base width: 48
PRINT SETTINGS
• PLA or PETG, 0.20 mm layers, 3 walls, 15% infill
• Prints on its wide base with no supports; add non-slip tape underneath if you like
ASSEMBLY
Drop cards into the four angled channels in groups. The wide base means you do not have to steady it with your other hand while you draw.
Every dimension is in millimetres. Tolerances on friction fits are 0.20-0.35 mm, which suits most FDM printers, but printers and filaments vary - print one part first and check the fit before you print a batch.
License: Creative Commons Attribution-NonCommercial-ShareAlike 4.0 (CC BY-NC-SA 4.0). Print it, remix it, share it - just credit the design and do not sell the printed parts or the files.