Su-30 Flanker-H print-in-place micro jet fighter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small, simple and easy to print 1/320 scale aircraft model.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 153
- Wydruki
- 2
- Wyświetlenia
- 458
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Check the cleaning section for detailed instructions for this model
About the Su-30 Flanker-H
The Sukhoi Su-30 Flanker-C/G/H is a twin-engine, two-seat supermaneuverable fighter aircraft developed in the Soviet Union in the 1980s by Russia's Sukhoi Aviation Corporation. It is a multirole fighter for all-weather, air-to-air interdiction missions. The Russian Aerospace Forces (VKS) were reported to have 130 Su-30SMs in operation as of 2024.
The Su-30 started as an internal development project in the Sukhoi Su-27 family by Sukhoi. From the Su-27UB two-seat trainer, the Su-27PU heavy interceptor was developed. The design plan was revamped and the Su-27PU was renamed to Su-30 by the Russian Defense Ministry in 1996. Of the Flanker family, the Su-27, Su-30, Su-33, Su-34 and Su-35 have been ordered into limited or serial production by the Russian Defense Ministry. Later, different export requirements split the Su-30 into two distinct version branches, manufactured by competing organizations: KnAAPO and the Irkut Corporation, both of which come under the Sukhoi aerospace group's umbrella.
KnAAPO manufactures the Su-30MKK and the Su-30MK2, which were designed for and sold to China, and later Indonesia, Uganda, Venezuela, and Vietnam. Due to KnAAPO's involvement from the early stages of developing the Su-35, these are basically a two-seat version of the mid-1990s Su-35. The Chinese chose an older but lighter radar so the canards could be omitted in return for increased payload. It is a fighter with both air supremacy and attack capabilities, generally similar to the U.S. F-15E Strike Eagle.
Irkut traditionally served the Soviet Air Defense and, in the early years of Flanker development, was responsible for manufacturing the Su-27UB, the two-seat trainer version. When India showed an interest in the Su-30, Irkut offered the multirole Su-30MKI, which originated as the Su-27UB modified with avionics appropriate for fighters. Along with its ground-attack capabilities, the series adds features for the air-superiority role, such as canards, thrust-vectoring, and a long-range phased-array radar. Its derivatives include the Su-30MKM, MKA, and SM for Malaysia, Algeria, and Russia respectively. The VKS operates several Su-30s and has ordered the Su-30SM variant as well.
About the model itself
There are hundereds of fighter models across the Internet.
Some of them focus on capturing all details to faithfully depict the aircraft's presence. However they're not great for FDM 3D printing. Due to sharp wings, complicated landing gear or engine nozzles, it is really difficult to achieve good results especially in a smaller scale. they also reqire a ton of supports, that not always work reliably.
On the other side of the spectrum we have simple aircraft designed with 3D printing in mind. With apropriate shaping they are easy to print and very robust, but they frequently have distorted proportions or lack important detail compared to the original plane.
I tried my best to fill that gap by combining the advantages of both of these groups. The goal was to make a model that exploits all of the printer capabilities without coliding with it's physical limitations. This way I was able to create an equivalent of a "Hot wheels" car, but for aviation fans. The pocket size makes them easy to carry and place anywhere. I spent a lot of time and effort adjusting wing thickness, landing gear design, learning from mistakes and improving the quality with every attempt. I also always include my own supports to ensure that all of the critical parts are secured. While following all of the technical requrements I also made sure that every model is unique and looks just like the real jet.
Printing
High quality settings, 0.12mm-0.15mm layer height (I am using 0.12mm)
0.4mm nozzle
NO supports (unless you choose a version without them)
100% infill
I reccomend to use raft to ensure that the model will not peel off mid-printing.
Printing (on my 3D printer) takes from 1h to 1h 40minutes depending on settings, printer efficiency and the size of a jet.
I recommend NOT to scale down the model, because some parts (air intakes, engines, nose) might be deformed, or not even printed, because they will become too thin for the slicer and printer. I also do not guarantee good results when scaling up.
Cleaning the model
Here's a small instruction how to remove the unnecessary parts after printing.
The photos show a MiG-29, but the instructions apply to all models.

First, remove the raft with side cutters.

Then find the gaps in the wings (marked with red arrows). Don't forget about the engines and stabilizers.

CAREFULLY break the supports with pliers, I do not reccomend to use hands, because the wing may break along the layers, not where it should be.

When removing the canard supports on the Su-30 you need to be super caucious. The supporting pillar under the wing is divided into two parts. First remove every support except the main wing and canard one's. Then while holding firmly both the canard and upper end of the support try to twist, crack and bend or break away the lower part of the pillar. Then you can remove the remaining part while holding the canard with pliers along the perforation line (it is really difficult to do correctly with bare hands).
Remember, that even if something breaks or cracks, there is usually no need to print the model again. Sometimes it is enough to glue the damaged part with super glue.

You can also smooth the wings with a small file or sandpaper and burn the strings with a lighter.
Additional information
If you like my aircraft models leave a like and post some pictures of your prints in the comment section. There you can also report some issues or bugs you noticed or problems you encountered so we can figure out how to fix them. You can also share your ideas about new models I could make.
I would like to point out that I am not a professional and I treat creating models for 3D printing as a hobby. Therefore, I am asking for your understanding towards my work.