1 / 3
Mordern F1 car with chassis of 1991 Mclaren Car — zdjęcie 1
1 / 3

Mordern F1 car with chassis of 1991 Mclaren Car

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This Is a new model of an f1 with Chassis of an 1991 Mclaren Car It has an Halo an air intake , a spoiler & front wings

Ocena
5 / 5
Polubienia
3
Pobrania
11
Wydruki
0
Wyświetlenia
48
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Built from simple geometric forms, this model captures the core contrast between 1991 McLaren design and modern F1 aerodynamics using pure, minimal geometry.

Front Wing

  • Base: A wide, flat rectangular plate spanning the width of the front nose.

  • Elements: Two to three thin, angled strips layered horizontally across the base to represent modern multi-element wing flaps.

  • Endplates: Tall, vertical rectangular blocks capped on both outer edges, sweeping back slightly to channel air around the front wheels.

Rear Wing

  • Main Plane: A thick, horizontal wedge or angled rectangular beam elevated high at the back of the car.

  • DRS Flap: A secondary, thinner rectangular strip mounted just above the main plane with a small visible gap.

  • Endplates & Supports: Two large, flat vertical plates sandwiching the wing on the sides, mounted onto a central vertical pillar connected to the rear chassis.

Air Intake

  • Shape: A clean triangular or rounded-oblong prism resting directly above the driver's cockpit.

  • Integration: Slanted backward to mimic modern airflow design while anchored directly into the flat, blocky spine of the 1991-style engine cover.

Halo Safety Structure

  • Central Pillar: A single, thin vertical cylinder mounted directly on the nosecone in front of the cockpit opening.

  • Overhead Hoop: A curved, horseshoe-shaped ring extending back from the central pillar, wrapping horizontally around the cockpit rim.

  • Rear Anchors: Two angled cylindrical struts branching from the back of the hoop, sloping downward to flush-mount into the chassis behind the driver's head.

Tagi