Mordern F1 car with chassis of 1991 Mclaren Car
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This Is a new model of an f1 with Chassis of an 1991 Mclaren Car It has an Halo an air intake , a spoiler & front wings
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 11
- Makes
- 0
- Views
- 48
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles & Machines
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Built from simple geometric forms, this model captures the core contrast between 1991 McLaren design and modern F1 aerodynamics using pure, minimal geometry.
Front Wing
Base: A wide, flat rectangular plate spanning the width of the front nose.
Elements: Two to three thin, angled strips layered horizontally across the base to represent modern multi-element wing flaps.
Endplates: Tall, vertical rectangular blocks capped on both outer edges, sweeping back slightly to channel air around the front wheels.
Rear Wing
Main Plane: A thick, horizontal wedge or angled rectangular beam elevated high at the back of the car.
DRS Flap: A secondary, thinner rectangular strip mounted just above the main plane with a small visible gap.
Endplates & Supports: Two large, flat vertical plates sandwiching the wing on the sides, mounted onto a central vertical pillar connected to the rear chassis.
Air Intake
Shape: A clean triangular or rounded-oblong prism resting directly above the driver's cockpit.
Integration: Slanted backward to mimic modern airflow design while anchored directly into the flat, blocky spine of the 1991-style engine cover.
Halo Safety Structure
Central Pillar: A single, thin vertical cylinder mounted directly on the nosecone in front of the cockpit opening.
Overhead Hoop: A curved, horseshoe-shaped ring extending back from the central pillar, wrapping horizontally around the cockpit rim.
Rear Anchors: Two angled cylindrical struts branching from the back of the hoop, sloping downward to flush-mount into the chassis behind the driver's head.