1 / 4
mix nozzle adapter "old" bayonet mixer to 3M b-system, for 50 mL two part epoxy duo-paks — zdjęcie 1
1 / 4

mix nozzle adapter "old" bayonet mixer to 3M b-system, for 50 mL two part epoxy duo-paks

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adapts old bayonet mixer nozzles to new 3M b-system nozzle system for 50 mL epoxy cartridges

Ocena
0 / 5
Polubienia
1
Pobrania
11
Wydruki
0
Wyświetlenia
95
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Public Domain

Background:

See this article for info on the new 3M b-system nozzles.  All 3M epoxy now comes with this connection which is not compatible with old bayonet mixer nozzles.  If you have a bunch of old bayonet nozzles, or want to continue using the old bayonet nozzles, this adapter is a good fix.

The new 3M b-system design has some nice features but the new mixer nozzles for it are expensive due to the added complexity.  This adapter lets you use the simpler old style.

Print instructions:

Any filament will work, I used PETG.  Print with fat / widest side down, use support "tree supports" and "on build plate only".  The support was not too difficult to remove.

Assembly:

The thinner side goes to the 3M cartridge.  The fit with the 3M side is tight intentionally to give the thickest wall possible on the adapter, it is the weakest point of the part.  I did not have to file or shave anything to make the adapter fit though.  The thick side that prints face down goes to the bayonet mixer. 

Sealing:

I applied hot glue to both connections to prevent any leaking, thicker epoxy may not need this but low viscosity epoxy will probably leak - you should hot glue so it does not leak while dispensing.  The hot glue can be broken later to use a new mix nozzle.

Tagi