1 / 7
SK8 linear rail shaft adapter / holder for 2040 aluminium profile — zdjęcie 1
1 / 7

SK8 linear rail shaft adapter / holder for 2040 aluminium profile

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An adapter / holder to mount an SK8 linear rail shaft at the right height on an Anet AM8 / PK8 / PK6 2040 aluminum…

Ocena
0 / 5
Polubienia
20
Pobrania
101
Wydruki
0
Wyświetlenia
663
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

An adapter / holder to mount an SK8 linear rail shaft at the right height on an Anet AM8 / PK8 / PK6 2040 aluminum profile. The linear rail is about 3mm above the upper side of the 2040 extrusion or about 7mm for the center of the rail.

SK8 linear rail shaft used

The 2040 profile is Nut 5 and all bolts and nuts are M5.

FreeCad 0.18 file attached.

Print Settings

Printer:

Anet A8

Rafts:

No

Supports:

No

Resolution:

0.2mm

Infill:

40% cubic

Filament:

Procatec PETG


Notes:

I printed it with 5 perimeters (0.4mm nozzle) to get the strongest part there where the bolts are tighten. 4 bottom and top layers.

Category: 3D Printer Parts

Tagi