SK8 linear rail shaft adapter / holder for 2040 aluminium profile
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An adapter / holder to mount an SK8 linear rail shaft at the right height on an Anet AM8 / PK8 / PK6 2040 aluminum…
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 102
- Makes
- 0
- Views
- 668
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
An adapter / holder to mount an SK8 linear rail shaft at the right height on an Anet AM8 / PK8 / PK6 2040 aluminum profile. The linear rail is about 3mm above the upper side of the 2040 extrusion or about 7mm for the center of the rail.
The 2040 profile is Nut 5 and all bolts and nuts are M5.
FreeCad 0.18 file attached.
Print Settings
Printer:
Anet A8
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
40% cubic
Filament:
Procatec PETG
Notes:
I printed it with 5 perimeters (0.4mm nozzle) to get the strongest part there where the bolts are tighten. 4 bottom and top layers.
Category: 3D Printer Parts