1 / 3
Squash Feet remixed for 2020 or 2040 aluminum extrusion / profiles
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple remix for this squash ball feet to be used on the 20mm side of 2020 or 2040 aluminum extrusion / profiles.…
- Ocena
- 5 / 5
- Polubienia
- 38
- Pobrania
- 124
- Wydruki
- 2
- Wyświetlenia
- 702
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 2) (Komentarze: 3)Remiksy (0)Kolekcje (73)Powiązane
A simple remix for this squash ball feet to be used on the 20mm side of 2020 or 2040 aluminum extrusion / profiles. The holes are for M5, but they can easily adjusted by changing the measurements in the attached FreeCad file.
Print Settings
Printer:
Anet A8
Rafts:
No
Supports:
No
Resolution:
0.2 - 0.28
Infill:
30-50% rectlinear
Filament:
Das Filament PETG
Rubinrot
Notes:
Use min. 4 top / bottom layers and perimeters.
Category: 3D Printer Parts