1 / 7
Angel-Vac Nasensauger Adapter für Handstaubsauger (nasal aspirator adapter for hand vacuum cleaner) — zdjęcie 1
1 / 7

Angel-Vac Nasensauger Adapter für Handstaubsauger (nasal aspirator adapter for hand vacuum cleaner)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Deutsch / German: Ein Adapter um den Angel-Vac Nasensauger für Standard-Staubsauger im Handstaubsauger von Aldi-Süd…

Ocena
5 / 5
Polubienia
3
Pobrania
59
Wydruki
1
Wyświetlenia
699
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Deutsch / German:

Ein Adapter um den Angel-Vac Nasensauger für Standard-Staubsauger im Handstaubsauger von Aldi-Süd benutzen zu können.

Das Akku-Handstaubsauger-Modell ist "EASY HOME VC 2118 0518".

Die Abmessungen der Außenseite der Öffnung des Adapters auf der Staubsauger-Seite sind ca. 17,5 x 42,2 mm (max) und werden ganz wenig kleiner je weiter man zum runden Teil geht.

Die Adapter-Seite für den Staubsauger kann mit etwas Kenntnis von FreeCAD rel. Leicht auch für andere Handstaubsauger angepasst werden - obwohl auch etwas "tricky" das Ganze ist; da ist leider FreeCAD oder mein Wissen noch nicht so weit...

Und hier noch ein Paar andere, nützliche Baby-Sachen:

Wickeltaschen-Halter / -Adapter für ABC Design Kinderwagen (Diaper bag holder for stroller): https://www.thingiverse.com/thing:3004919

Philips Avent SCD620 / SCD630 camera holder clamp 30mm (remix): https://www.thingiverse.com/thing:3051496

English:

An adapter to use the Angel-Vac nasal aspirator for standard vacuum cleaner in hand vacuum cleaner from Aldi-Süd.

The cordless hand vacuum cleaner model is "EASY HOME VC 2118 0518".

The dimensions of the outside of the opening of the adapter on the vacuum cleaner side are approx. 17.5 x 42.2 mm (max) and will be slightly smaller the further you go to the round part.

The adapter page for the vacuum cleaner may with some knowledge of FreeCAD rel. Easily adapted to other hand vacuum cleaners - although a bit "tricky" is the whole thing; unfortunately is FreeCAD or my knowledge not so far to make it better / more elegant / easier ...

Print Settings

Printer:

Anet A8

Rafts:

No

Supports:

No

Resolution:

0.28 mm

Infill:

No infill; 2 perimeters

Filament:

Das Filament PETG


Notes:

Brim: 10mm

Category: Other

Tagi