1 / 8
FibreSeeker 3 Purge Bin w/ Magnets — zdjęcie 1
1 / 8

FibreSeeker 3 Purge Bin w/ Magnets

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

FibreSeeker 3 Purge Bin w/ Magnets

Ocena
0 / 5
Polubienia
1
Pobrania
19
Wydruki
0
Wyświetlenia
68
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

A Purge Trash Bin for the FiberSeeker 3 Continuous Fiber 3D Printer. Utilizes alignment tabs and magnet to position the bin at the opening at the rear of the print.

The model provide is designed to utilize (4) 12.0 mm Dia. x 1.75 mm Thk. Rare Earth Magnets. Two magnets stacked per hole and CA glued in place. You can modify the model in your slicer to accommodate any magnet size you may have or want to use.

Recommended Print Settings

    Material: PLA (but feel free to use what you want)

    Layer Height: 0.16 mm or 0.20 mm

    Nozzle: 0.4 mm  (mostly for definition)

    Number of Walls: 3

    Infill Density: 10%

    Top & Bottom Thickness: ~0.8 mm or 4-5 layers

    Wall Generator:  Arachne

    Order of Walls: inner/outer

    Supports: Tree (auto)

These models and/or the items created from these models are not available for commercial sale in any form. 

Tagi