FibreSeeker 3 Purge Bin w/ Magnets
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
FibreSeeker 3 Purge Bin w/ Magnets
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 23
- Makes
- 0
- Views
- 83
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
A Purge Trash Bin for the FiberSeeker 3 Continuous Fiber 3D Printer. Utilizes alignment tabs and magnet to position the bin at the opening at the rear of the print.
The model provide is designed to utilize (4) 12.0 mm Dia. x 1.75 mm Thk. Rare Earth Magnets. Two magnets stacked per hole and CA glued in place. You can modify the model in your slicer to accommodate any magnet size you may have or want to use.
Recommended Print Settings
Material: PLA (but feel free to use what you want)
Layer Height: 0.16 mm or 0.20 mm
Nozzle: 0.4 mm (mostly for definition)
Number of Walls: 3
Infill Density: 10%
Top & Bottom Thickness: ~0.8 mm or 4-5 layers
Wall Generator: Arachne
Order of Walls: inner/outer
Supports: Tree (auto)