Grado SR325 TRS PCB connector holding ring
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A ring to hold a TRS PCB connector to allow for a fully reversible TRS connector mod on the Grado SR-style headphones
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 47
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial
A ring to hold a TRS PCB connector to allow for a fully reversible TRS connector mod on the Grado SR-style headphones.
I specifically used the HanElectricity PJ-313B connector. I tested with two other female TRS connectors and found that this PJ-313B connector worked the best. It is fully possible that this model might work with other connectors. I did have to file down the square edges around the hole in the connector to make it sit as far out as possible to work with my trs cable.
I printed two rings (one per cup) in black PETG and super-glued the connector to the ring.