Grado SR325 TRS PCB connector holding ring
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A ring to hold a TRS PCB connector to allow for a fully reversible TRS connector mod on the Grado SR-style headphones
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 47
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial
A ring to hold a TRS PCB connector to allow for a fully reversible TRS connector mod on the Grado SR-style headphones.
I specifically used the HanElectricity PJ-313B connector. I tested with two other female TRS connectors and found that this PJ-313B connector worked the best. It is fully possible that this model might work with other connectors. I did have to file down the square edges around the hole in the connector to make it sit as far out as possible to work with my trs cable.
I printed two rings (one per cup) in black PETG and super-glued the connector to the ring.