Height extension for Folding Shoe Rack or Shelf
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Height extension for Folding Shoe Rack or Shelf modell. If your shoes are a bit higher.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 117
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I use this unit https://www.printables.com/model/1740060-folding-shoe-rack-or-shelf-print-in-place as a permanent shoe rack. It was a bit too low for my shoes, so I designed small adapters to add some height.
They slot in easily with minimal pressure - just like the original connectors - and raise the next shelf by a few centimeters.
Printing
If printed with the long side on the build plate, supports are required. The press-fit connection is tighter and it takes a bit more force to fully assemble the first time.
If printed upright, no supports are needed. Though the connection might break if layer adhesion isn't strong, and the press-fit is slightly looser.
Tested with PETG / 0.2 layers and default Balanced settings for Core One+.